PFS Pop Out Rainbow Stamp & Die┃Inspiration Cards

in , , , , , , , , , , , , ,

PFS Pop Out Rainbow Stamp & Die┃Inspiration Cards

Happy Sunday, Friends! Today, I’m sharing these 2 “Uplifting Rainbow” cards made using the just released Pop Out Rainbow Cling Stamp Set. Besides the stamp, I also will be using the Color Block Rainbow Die which happens to be its coordinated die. So, without further ado let’s jump into the step by step on how I made them ↓

Yasmin-Diaz-PFS-Pop-Out-Rainbow-Stamp & Die-1.jpeg

To begin with, I started by placing inside my stamping tool a white card panel, then I placed over the card panel the Pop Out Rainbow Cling Stamp Set, once the stamp was over the card panel I closed the stamping tool door and I picked up the stamp. So, as soon as the stamp was on my stamping tool door, I popped out the inside pieces however, I left the largest piece and the rainbow frame onto place, as I was going to start the stamping process from there. Therefore, for the first example I used gold heat embossing as my first color, and so on and so forth I went ahead and continued the stamping with the following colors; Ballet Slipper, Coral Reef, Clementine, Apricot, Peach Fuzz, Marigold and Mint.

Yasmin-Diaz-PFS-Pop-Out-Rainbow-Stamp & Die-2.jpeg

Moving along, after I had the stamping done, I removed the stamp from my stamping tool, but I left the card panel onto place to get the sentiment stamp over the rainbow. So, for the sentiment, I added lots of Embossing Powder Tool to the card panel, and I’ve got one of the sentiments from the No One Compares To You Stamp Set stamped with WOW! Embossing Ink. So, as soon as the stamping was done, I added WOW! Metallic Gold Rich embossing powder and I heated set the powder with my heat embossing tool. Once the powder was completely melted, I trimmed the edges off the card panel slightly smaller than the card base, and I lastly wrapped around 5X on the top side of the card panel a large piece of Metallic Gold Thread. Then right after that, I adhered the backing of the card panel with double-sided tape to an A2 top folding white card base, and I finished the card off by adhering a artist bow which I had previously created out of vellum using dies from the Artistic Bows Die Set.

Yasmin-Diaz-PFS-Pop-Out-Rainbow-Stamp & Die-3.jpeg

For the second example, I went ahead and I lined up the Color Block Rainbow Die over a white card panel and then, I ran the die and the cardstock through my Platinum 6 Die Cutting and Embossing Machine. Once, I had the die-cutting pieces done I kept them into place and I placed them inside my stamping tool so, as soon as they were in place, I’ve got the stamping done over the 5 larger pieces with the following colors; Ballet Slipper, Coral Reef, Clementine, Marigold and Mint.

Yasmin-Diaz-PFS-Pop-Out-Rainbow-Stamp & Die-4.jpeg

Therefore, after I had the stamping done, I removed the stamped pieces from my stamping tool and got the adhered with liquid glue as shown in the image above over a white card panel. So, as soon as I was done adhering them over the card panel, I trimmed the edges off, and I mounted it with craft foam and double-sided tape to an A2top folding white card base. Lastly, I to add dimension I mounted the white die-cutting clouds that I created with a die from my stash, and then to finish the card off, I placed the card once again inside my stamping tool and I’ve got a sentiment from the same stamp set stamped and gold heat embossed on the top right corner of the stamp.
NOTE: I didn’t get a clear impression for the heat embossed sentiment due that I had the sentiment embossed over the die-cutting which I don’t mind at all, but if you don’t like the look… you might as well can use a smaller sentiment instead.

Yasmin-Diaz-PFS-Pop-Out-Rainbow-Stamp & Die-5.jpeg

So, that’s it for today, as you can see in the image above I finished both card off by gluing down with liquid glue some of the Heaven Sent Sequin Mix for a sparkly look. With that said, I hope you’ve enjoyed reading the step by step on how I’ve created these 2 “Uplifting Rainbow” cards. As always, I appreciate the time that takes you to read my blog posts. Below, you’ll find the supply list for the products used on today’s blog post. If, you get inspired by today’s project be sure to tag me on Instagram➝@cardsandcraftsbyyaz I’d love to see what you’re creating.

Thank you and happy crafting, your time is valuable.
Don't forget to keep spreading kindness
Today and Always

Love,
Yasmin

Your imagination is Your limit.

All photography provided by Yasmin Diaz

Creativity is contagious, pass it on.

–Albert Einstein

Disclosure

I am creating this blog with the purpose of sharing how I design my cards, the information provided here is base in my own opinion and creativity. I am not an expert by any means, and I only share the way that I design my cards. Most of the products used for my blog posts are personally purchased by me. However, I did receive the products by Pinkfresh Studio and WOW! Embossing Powder. Other than that, all referral links were added for you to know from where I purchase or receive the items from as, all of products shared and mentioned in each of my blog posts are simply because I use, and truly love them.